Wet Dry Industrial Vacuum

Wet Dry Industrial Vacuum

A wet dry industrial vacuum can do more than simply vacuum out dry materials. If there is an area where a liquid has been spilled, then you should also be able to make use of a wet dry industrial vacuum to collect both wet and dry materials. Such a vacuum can be adapted to perform different duties. All that needs to be done in order to get it to suck out dry or wet materials is change its filter as well as perhaps the waste collection container so that different residue types can be kept separately.

Industrial vacuum –sucks out dust debris and liquid spills

Essentially, a wet dry industrial vacuum is one that is used for sucking out dust as well as debris and liquid spills as well. Such a vacuum has canister as well as a hose and it also has a filter that helps in blocking larger pieces of debris during the dry vacuuming process. When you need to suck out liquids, then you will need to take out the filter to allow the liquid to be stored inside the canister. Mostly, a wet dry industrial vacuum is used in all kinds of industrial applications and it is also used in shops.

Operate in different ways

There are different ways to operate a wet dry industrial vacuum. In the case of dry vacuuming, you will need to make sure that the filter is properly secured in its cage. Usually, it is secured with the help of a nut. Before using the wet dry industrial vacuum for dry vacuuming, make sure that the filter is not clogged. If there is any clogging, then the filter must be properly cleaned.

Also, make sure that the filter is absolutely dry and if it is wet then let the wet dry industrial vacuum work for ten minutes so that the filter has time to dry out. Next, attach the nozzle to the hose and start the wet dry industrial vacuum and also do the dry vacuuming. After the vacuuming has been done, take the drum out and empty its contents. For this, you will need to take its latches and pull them out. Next, take out the top assembly and dump the contents of the drum out.

If you are going to use the wet dry industrial vacuum for wet vacuuming, then you will need to start off by removing the filter. For this, you will need to take out the nut that holds the filter in place and then simply take the filter out of its cage. Next, take the wet nozzle and attach it to the hose and then switch on the wet dry industrial vacuum.

After the wet vacuuming has been completed, it is time to empty out the drum. As soon as the drum fills up completely, a liquid float mechanism will shut the wet dry industrial vacuum off automatically. You will know that it is time to empty out drum which you can do by taking the drain cap and unscrewing it. The cap is located at the bottom of your wet dry industrial vacuum.

Back to Top